Smart Solar Sunjet 500 Solar powered pump can be used in a pond or container as a water feature.
Why we like it:
The Smart Solar Sunjet 500 solar pond pump adds extra water overgenation to your pond. It activates during periods of direct sunlight, just when you need it most. A great way to provide oxygen for fish and plants without using additional electricity.
Alternatively, you can put the Sunjet 500 into a water tub to make a free standing water feature.
Smart Solar Sunjet 500 Solar powered pump requires direct sunlight to operate and doesn't have battery backup.
Features:
- Water pump powered by solar energy
- Pump fitted with suckers for bottom mounting or can be used with the float in deeper water
- Operates in direct sunlight
- Provides water oxygenation and circulation
- Powered by a separate solar panel (supplied)
- 10 ft : 3 m cable to solar panel provides location flexibility
- Low voltage water pump with filter
- 3 different fountain heads to change fountain effect
- Maximum fountain height 40” : 100cm (jet fountain head)
- No operating cost
Frequently asked questions
How do I get my pump apart to clean it?
Pull the pump away from the float. Hold the pump with the label facing you so you can read it. Pull the bottom off gently where the arrow heads meet the pump, without pulling the foam. When the bottom is removed the propeller is visible and all can be cleaned from here. Replace all the parts and push the pump back onto the float.
How do I get my pump apart to clean it?
Pull the pump away from the Lily. Pull the pump in half at the seam. The filter is now visible to gently remove and clean. Replace the filter back into the pump. To clean the propeller gently rotate the funnel to release the casing and remove the propeller to clean. Replace all the parts and push the two halves of the pump back together. Re-attach to the float.
My pump has stopped working. What do I do?
Clean the pump as directed above. Make sure the solar panels on the float are cleaned and positioned in direct sunshine. Check that the wire is in good condition and connected. Make sure the tube running between the pump and up through the float fountain is clear from dirt and debris.