Sunjet 150 Solar Fountain
This solar powered fountain will provide the gentle sound of splashing water while the water jets sparkle in the sunlight. Use it in a pond or create your own water feature within any container such as your favourite bowl.
Why we like it:
This solar powered fountain requires minimum installation and can be floated on the surface of the water or, using the inbuilt suckers, attached to the bottom of a shallow pond or container. It can be incorporated into an ornamental container or barrel giving you the freedom to create your own water feature.
How does it work?
A separate solar panel uses direct sunlight to power the fountain pump during daylight hours. The device includes 3 different heads to allow varying fountain effects and a filter is also included in the pump. The water will be oxygenated by the continuous circulation through the fountain. The solar panel can be fixed to a wall or in the ground using the spike (included) and a 10ft-3m cable allows for location flexibility.
Technical Details:
- 3 different fountain heads
- Circulates and oxygenates water
- No operating costs
- Flow rate 180 l/h
- Solar Panel: Voltage 6 V Power 0.8 W
- Pump: Voltage 4-12 V
- Cable Length: 3m, 10ft
Frequently asked questions
How do I get my pump apart to clean it?
Pull the pump away from the float. Hold the pump with the label facing you so you can read it. Pull the bottom off gently where the arrow heads meet the pump, without pulling the foam. When the bottom is removed the propeller is visible and all can be cleaned from here. Replace all the parts and push the pump back onto the float.
How do I get my pump apart to clean it?
Pull the pump away from the Lily. Pull the pump in half at the seam. The filter is now visible to gently remove and clean. Replace the filter back into the pump. To clean the propeller gently rotate the funnel to release the casing and remove the propeller to clean. Replace all the parts and push the two halves of the pump back together. Re-attach to the float.
My pump has stopped working. What do I do?
Clean the pump as directed above. Make sure the solar panels on the float are cleaned and positioned in direct sunshine. Check that the wire is in good condition and connected. Make sure the tube running between the pump and up through the float fountain is clear from dirt and debris.